The selection, installation, and maintenance of cantilever beam sensors significantly impact their measurement accuracy and lifespan. When selecting a sensor, the range should be chosen based on the project's maximum load, and a 30% safety margin is recommended to avoid overload damage. For dynamic load scenarios, the sensor's fatigue life must be considered. The accuracy class should be selected according to application requirements, such as OIML Class C or D. Accuracy is typically characterized by parameters such as nonlinearity and hysteresis error. For laboratory projects, a 0.05%FS high-precision sensor can be used, while 0.5%FS is sufficient for industrial applications. Environmental factors such as humidity, dust, corrosion, and temperature must be considered when selecting the protection level, such as IP65 or IP67, as well as the material, such as alloy steel or stainless steel. Special materials are required for high-temperature environments (>150 graden), en roestvrij staal met een coating moeten worden gebruikt in zeer corrosieve omgevingen.
De installatiemethode kan worden geselecteerd op basis van de projectvereisten, zoals getrapte positioneringsgaten, afneembare fittingen of interfaces met schroefdraad. De signaaluitvoer moet compatibel zijn met het acquisitiesysteem; analoge signalen hebben sterke anti-interferentiemogelijkheden, terwijl digitale signalen geschikt zijn voor transmissie over lange afstanden. Voor aansluiting op een computer of PLC kan een digitale sensor met ingebouwde analoog-digitaalomzetter worden geselecteerd. Om excentrisch belasten tijdens de installatie te compenseren, wordt de voorkeur gegeven aan sensoren met ingebouwde stalen kogelkrachtoverbrengingscomponenten of dubbele kogelkopconstructies. Deze sensoren elimineren excentrische laadfouten via kogelgroeven en veersystemen, waardoor installatie en foutopsporing worden vereenvoudigd.
